Solar System

скачати

Solar System Essay, Research Paper

Solar cells today are mostly made of silicon, one of the most common elements on Earth.

The crystalline silicon solar cell was one of the first types to be developed and it is still the most

common type in use today. They do not pollute the atmosphere and they leave behind no harmful

waste products. Photovoltaic cells work effectively even in cloudy weather and unlike solar

heaters, are more efficient at low temperatures. They do their job silently and there are no

moving parts to wear out. It is no wonder that one marvels on how such a device would

function.

To understand how a solar cell works, it is necessary to go back to some basic atomic

concepts. In the simplest model of the atom, electrons orbit a central nucleus, composed of

protons and neutrons. each electron carries one negative charge and each proton one positive

charge. Neutrons carry no charge. Every atom has the same number of electrons as there are

protons, so, on the whole, it is electrically neutral. The electrons have discrete kinetic energy

levels, which increase with the orbital radius. When atoms bond together to form a solid, the

electron energy levels merge into bands. In electrical conductors, these bands are continuous but

in insulators and semiconductors there is an “energy gap”, in which no electron orbits can exist,

between the inner valence band and outer conduction band [Book 1]. Valence electrons help to

bind together the atoms in a solid by orbiting 2 adjacent nucleii, while conduction electrons,

being less closely bound to the nucleii, are free to move in response to an applied voltage or

electric field. The fewer conduction electrons there are, the higher the electrical resistivity of

the material.

In semiconductors, the materials from which solar sells are made, the energy gap Eg is

fairly small. Because of this, electrons in the valence band can easily be made to jump to the

conduction band by the injection of energy, either in the form of heat or light [Book 4]. This

explains why the high resistivity of semiconductors decreases as the temperature is raised or the

material illuminated. The excitation of valence electrons to the conduction band is best

accomplished when the semiconductor is in the crystalline state, i.e. when the atoms are

arranged in a precise geometrical formation or “lattice”.

At room temperature and low illumination, pure or so-called “intrinsic” semiconductors

have a high resistivity. But the resistivity can be greatly reduced by “doping”, i.e. introducing

a very small amount of impurity, of the order of one in a million atoms. There are 2 kinds of

dopant. Those which have more valence electrons that the semiconductor itself are called

“donors” and those which have fewer are termed “acceptors” [Book 2].

In a silicon crystal, each atom has 4 valence electrons, which are shared with a

neighbouring atom to form a stable tetrahedral structure. Phosphorus, which has 5 valence

electrons, is a donor and causes extra electrons to appear in the conduction band. Silicon so

doped is called “n-type” [Book 5]. On the other hand, boron, with a valence of 3, is an

acceptor, leaving so-called “holes” in the lattice, which act like positive charges and render the

silicon “p-type”[Book 5]. The drawings in Figure 1.2 are 2-dimensional representations of n-

and p-type silicon crystals, in which the atomic nucleii in the lattice are indicated by circles and

the bonding valence electrons are shown as lines between the atoms. Holes, like electrons, will

remove under the influence of an applied voltage but, as the mechanism of their movement is

valence electron substitution from atom to atom, they are less mobile than the free conduction

electrons [Book 2].

In a n-on-p crystalline silicon solar cell, a shadow junction is formed by diffusing

phosphorus into a boron-based base. At the junction, conduction electrons from donor atoms in

the n-region diffuse into the p-region and combine with holes in acceptor atoms, producing a

layer of negatively-charged impurity atoms. The opposite action also takes place, holes from

acceptor atoms in the p-region crossing into the n-region, combining with electrons and

producing positively-charged impurity atoms [Book 4]. The net result of these movements is the

disappearance of conduction electrons and holes from the vicinity of the junction and the

establishment there of a reverse electric field, which is positive on the n-side and negative on

the p-side. This reverse field plays a vital part in the functioning of the device. The area in

which it is set up is called the “depletion area” or “barrier layer”[Book 4].

When light falls on the front surface, photons with energy in excess of the energy gap

(1.1 eV in crystalline silicon) interact with valence electrons and lift them to the conduction

band. This movement leaves behind holes, so each photon is said to generate an “electron-hole

pair” [Book 2]. In the crystalline silicon, electron-hole generation takes place throughout the

thickness of the cell, in concentrations depending on the irradiance and the spectral composition

of the light. Photon energy is inversely proportional to wavelength. The highly energetic photons

in the ultra-violet and blue part of the spectrum are absorbed very near the surface, while the

less energetic longer wave photons in the red and infrared are absorbed deeper in the crystal and

further from the junction [Book 4]. Most are absorbed within a thickness of 100 ?m.

The electrons and holes diffuse through the crystal in an effort to produce an even

distribution. Some recombine after a lifetime of the order of one millisecond, neutralizing their

charges and giving up energy in the form of heat. Others reach the junction before their lifetime

has expired. There they are separated by the reverse field, the electrons being accelerated

towards the negative contact and the holes towards the positive [Book 5]. If the cell is connected

to a load, electrons will be pushed from the negative contact through the load to the positive

contact, where they will recombine with holes. This constitutes an electric current. In crystalline

silicon cells, the current generated by radiation of a particular spectral composition is directly

proportional to the irradiance [Book 2]. Some types of solar cell, however, do not exhibit this

linear relationship.

The silicon solar cell has many advantages such as high reliability, photovoltaic power

plants can be put up easily and quickly, photovoltaic power plants are quite modular and can

respond to sudden changes in solar input which occur when clouds pass by. However there are

still some major problems with them. They still cost too much for mass use and are relatively

inefficient with conversion efficiencies of 20% to 30%. With time, both of these problems will

be solved through mass production and new technological advances in semiconductors.

31f

Додати в блог або на сайт

Цей текст може містити помилки.

A Free essays | Essay
9.7кб. | download | скачати


Related works:
Our Solar System
The Solar System
The Solar System
The Solar System
Our Conceptualization Of The Solar System
© Усі права захищені
написати до нас